February 23, 2006
I would like to get the opinion of all of the great chocolatiers in this forum and find out what chocolate making equipment you prefer. I am currently researching new equipment for our chocolate production line within the business that I work for and am trying to find equipment that is easy to clean but yet will carry me from todays' small scale production through to tomorrows stepped up production needs. Currently we are only producing about 300lbs+ a week. I'm currently working with Hillards equipment, and a small peppy pumper depositing unit. Any thoughts/suggestions? I have seen so many different variations but the key element at this point and time is it has to be easy to clean, for the different flavors of chocolate we produce we actually put spices and natural oils in the chocolate itself, which causes me grave difficulty from a production of different flavors standpoint to seeking out more efficient methods. I'm happy for any and all suggestions. Thanks!
Keep it Sweet!
March 8, 2009
I am Senior Director of Hake Plastic Molds in Alden NY, and owner of The Chocolate Butterfly and Chocolatier; since 1998, in Canada.
While there are many different pumps on the market, I have come to the conclusion that they're rather expensive. Some can cost upwards of US$7000 each.
We at Hake Plastic Molds, manufacture a series of Chocolate equipment made affordable to the average Chocolatier.
The Hake Power Pump, costs a reasonable US$2300.00 each and can be used on most tempering machines, similar to that of Hilliard's that have either a rotating or fixed bowl. The Hake Power Pump can be mounted on the side of the machine.
It draws the Chocolate through an Food approved Stainless Steel cylinder and can dispense a metered dose in quarter ounce increments upto 6 ounces.
The Hake Power Pump, is easy to disassemble. It includes a supplied wrench and comes apart for easy cleaning when you remove a few nuts.
The Hake Power Pump has been used for nearly 30 years, in most instances Pumps from the early 1980's are still working smoothly.
We also are re-developing our Chocolate tempering tanks which will be available for the Philadelphia Candy Show, in Atlantic City in 2010.
Hake Plastic Molds, manufactures a series of Vibrating tables made of heavy weight Aluminum, and cost considerably less than our competition. The sizes include: 10" x 12" designed for European and hobby molds, 16" X 16", and a large 32" X 16" to accommodate our large 3 foot tall Santa Claus and Easter Bunny Chocolate Molds.
We also manufacture the Hake Magnetic Rotational Molding system, using our Proprietary Zip Lock Unit; which can hold a series of molds for hollow casting.
Now, when it comes to my knowledge in melting chocolate, I would suggest melting the chocolate and using the "drip-feed" method on adding the chocolate to your tempering machine, making certain to check the temperatures prior to adding; so that you don't put in too hot of liquid chocolate.
Not too long ago, I created a warming oven, with 2 oil-filled heaters, a stainless steel rack and hotel pans. The entire rack was wrapped with mylar bubble wrap; normally used to insulate water heaters.
On a typical evening, I was able to melt some 300 pounds of chocolate ready for production the following day.
Feel free to e-mail me,
Shawn Alter - Chocolatier (The Chocolate Butterfly)
Senior Marketing Director - Hake Plastic Molds - Alden NY 14004
Most Users Ever Online: 89
Currently Browsing this Page:
Hans-Peter Rot: 1462
Martin Christy: 614
Lone Ly: 397
Angela P. Gomez
Guest Posters: 1